Installing The Clutch Discs - Husqvarna FE 250 2016 Repair Manual

18 ENGINE
18.5.16
216

Installing the clutch discs

-
Slide the clutch basket onto the gearbox main shaft. Turn the
fD
oil pump gear until the gear teeth of the clutch basket
mesh.
C,
-
Slide on washer and inner clutch hub (3.
Position the new lock washer and mount nut (D. Tighten the
nut, holding the inner clutch hub with a special tool.
Guideline
Nut, inner M18x1 .5
clutch hub
I Holding wrench (51129003000)
-
Secure the nut with the lock washer.
-
Thoroughly oil the clutch facing discs.
-
Beginning with an intermediate clutch disc, alternately insert
all other clutch facing discs and intermediate clutch discs into
the clutch basket.
-
Mount clutch throw-out
8.
-
Position pressure cap
100 Nm (73.8 lbf ft)
Loctite
(a p. 320)
O.
® 243
™
..