9 SHOCK ABSORBER, SWINGARM
Install the seal ring bearer
groove.
0.
Mount lock ring
•
Info
I
Do not scratch the inner surface.
Pull out the piston rod so that the seal ring retainer rests
against the lock ring.
Mount locking cap (3 of the damper cartridge.
Bleed and fill the damper.
Fill the damper with nitrogen.
Mount rubber cap @ of the reservoir.
Alternative 1
-
Turn adjusting screw � clockwise with a screwdriver up
to the last perceptible click.
-
Turn counterclockwise by the number of clicks corre
sponding to the shock absorber type.
Guideline
Compression damping, low-speed
Comfort
Standard
Sport
-
Turn adjusting screw
socket wrench.
-
Turn counterclockwise by the number of turns corre
sponding to the shock absorber type.
Guideline
Compression damping, high-speed
Comfort
Standard
Sport
-
Turn adjusting screw Gi) clockwise up to the last percep
tible click.
C,
and push it under the ring
(a
p. 70)
(a
p. 73)
20 clicks
18 clicks
16 clicks
0
all the way clockwise with a
2.5 turns
2 turns
1.5 turns
69