Installing The Spacer; Installing The Clutch Push Rod; Removing The Engine From The Engine Assembly Stand - Husqvarna FE 350 2016 Repair Manual

18.5.34

Installing the spacer

18.5.35

Installing the clutch push rod

Removing the engine from the engine assembly stand

18.5.36
-
Grease the shaft seal ring before mounting.
-
Position the O-ring. Mount spacer
inward.
O.
Mount clutch push rod
-
Remove the screw connection from the special tool.
I
Holder and fitting for work stand (77229002000)
-
Remove the engine from the engine assembly stand.
Info
Work with an assistant or a motorized hoist.
18 ENGINE
O
with the bevel facing
41
(� p. 363)
251