Installing The Clutch Discs - Husqvarna FS 450 2019 Repair Manual

17 ENGINE
17.5.16
232

Installing the clutch discs

311602-10
-
Lock the clutch basket and primary gear wheel using special
tool@).
I Gear segment (80029004000)
- @).
Mount and tighten nut
Guideline
Nut, primary M20LHx1.5
gear wheel
-
Position crankshaft to TDC and lock with special tool �.
I Locking screw (113080802)
O.
-
Mount sleeves
-
Thoroughly oil the clutch facing discs.
-
Mount intermediate clutch disc
Guideline
Thickness of intermediate
f)
clutch disc
-
Alternately place the clutch facing and 7 intermediate discs
into the clutch basket.
Guideline
Thickness of intermediate
clutch discs
-
Place intermediate clutch disc
Guideline
Thickness of intermediate
C,
clutch disc
(IUI p. 320)
100 Nm (73.8 lbf ft)
®
Loctite 243
(IUI p. 309)
f)
with marking
S.
1.0 mm (0.039 in)
1.4 mm (0.055 in)
C,
into the clutch basket.
1.0 mm (0.039 in)
™
..