Husqvarna FE 350 2016 Repair Manual page 266

Table of Contents

Advertisement

21
LUBRICATION SYSTEM
264
Danger
Danger of poisoning
inhaling them may result in unconsciousness and
death.
-
Always make sure there is sufficient ventilation
when running the engine.
-
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
-
Start the engine and let it warm up.
-
Check the engine oil pressure.
Engine oil pressure
Engine oil temperature:
80 °C (176 °F)
Engine speed:
1,600 rpm
Engine oil temperature:
80 oc (176 °F)
Engine speed:
6,000 rpm
If the measured value is less than the specification:
-
Check the oil pumps for wear. Check that all oil holes
are clear.
-
Switch off the engine.
Warning
Danger of burns
very hot when the machine is driven.
-
Wear appropriate protective clothing and safety
gloves. In case of burns, rinse immediately with
lukewarm water.
-
Remove the special tools.
-
Mount and tighten the release screw of the chain adjuster.
Guideline
Screw, unlocking
of timing chain ten-
sioner
Exhaust gases are toxic and
0.9 bar (13 psi)
2.5 bar (36 psi)
Some vehicle components get
M10x1
8 Nm (5.9 lbf ft)
..

Advertisement

Table of Contents
loading

Table of Contents