Husqvarna FE 350 2016 Repair Manual page 140

14 WHEELS
138
-
Mount lock ring@.
✓ The lock ring engages audibly.
-
Grease new shaft seal ring
flush.
(FE 350 5 US)
-
Remove shaft seal ring
-
Remove lock ring 4i}.
-
Remove shaft seal ring (s).
-
Using a suitable tool, press bearing
inside to the outside.
-
Remove spacing tube
-
Using a suitable tool, press bearing (3 out from the
inside to the outside.
-
Check spacer washer @ for damage and wear.
If the spacer washer is damaged or worn:
Replace the spacer washer.
O
and press it in until it is
O.
8
out from the
0.