Installing The Clutch Discs - Husqvarna FC 450 2018 Repair Manual

17 ENGINE
17.5.16
G)-
228

Installing the clutch discs

311602-10
-
Lock the clutch basket and primary gear wheel using special
tool@).
I Gear segment (80029004000)
- @).
Mount and tighten nut
Guideline
Nut, primary M20LHx1.5
gear wheel
-
Position crankshaft to TDC and lock with special tool �.
I Locking screw (113080802)
-
Thoroughly oil the clutch facing discs.
-
Mount intermediate clutch disc
Guideline
Thickness of intermediate
6)
clutch disc
-
Alternately place the clutch facing and 7 intermediate discs
into the clutch basket.
Guideline
Thickness of intermediate
clutch discs
-
Place intermediate clutch disc
Guideline
Thickness of intermediate
C,
clutch disc
-
Mount clutch throw-out
(IUI p. 318)
100 Nm (73.8 lbf ft)
Loctite
(IUI p. 307)
6)
with marking
S.
1.0 mm (0.039 in)
1.4 mm (0.055 in)
C,
into the clutch basket.
1.0 mm (0.039 in)
O.
®
243
™
..