Table of Contents
Advertisement
7.6
Adjusting the �la� in the throttle cable
7 HANDLEBAR,CONTROLS
Preparatory work
-
Remove the seat.
(�
p. 97)
-
Remove the fuel tank.
(�
-
Check the routing of the throttle cable.
Main work
-
Move the handlebar to the straight-ahead position.
O.
-
Push back sleeves
8.
-
Loosen nut
Turn adjusting screw@) in as far as possi-
ble.
8.
-
Loosen nut
Turn adjusting screw
6)
play
in the throttle cable at the throttle grip.
I
Guideline
Play in throttle cable
8.
-
Tighten nut
-
Press and hold the throttle grip in the closed setting. Turn
adjusting screw @) out until there is no play in throttle
cable (D.
8.
-
Tighten nut
O
-
Push sleeves
on. Check the throttle grip for smooth oper-
ation.
Finishing work
-
Install the fuel tank.
(�
p. 100)
-
Mount the seat.
(�
p. 97)
-
Check the play in the throttle cable.
p. 98)
(�
p. 45)
0
so that there is
I
3 ... 5 mm (0.12 ... 0.2 in)
(�
p. 46)
47
Advertisement
Table of Contents
