Removing The Shift Shaft; Removing The Shift Drum Locating Unit - Husqvarna FE 350 2016 Repair Manual

18.3.21

Removing the shift shaft

18.3.22

Removing the shift drum locating unit

-
Take off inner clutch hub@ and washer (5).
Info
The washer usually sticks to the inner clutch hub.
8-
-
Take off clutch basket
-
Take off needle bearing
O
-
Push sliding plate away from the shift drum locating
unit @. Remove shift shaft (5) with the washer.
O.
-
Remove screw
-
Push away locking lever @ from shift drum locating unit (5)
and remove the shift drum locating unit.
-
Relieve tension from the locking lever.
0
and collar sleeve C).
18 ENGINE
..
..
191