Table 32 Port Parameters - WAGO 765-1503/100-000 Product Manual

Planning
No.
95
96
Parameters 100 to 130
Parameters 100 and 102 configure port X01.
Parameters 104 and 106 configure port X02.
...
Parameters 128 and 130 configure port X08.
No.
100,
104, ...
102,
106, ...
42 Product manual | Version: 2.0.0
16DO FLD EI DC 24V 2.0A
Parametername Value Range
Bluetooth timeout 6 ... 59 [s]
Reserved 0
Parametername Value Range
DO port X01/X02/... 2: Output
– pin 4 mode
3: Static On
DO port X01/X02/... 2: Output
– pin 2 mode
3: Static On
Default Description
30 Switch-off time of the Bluetooth
not used;
®
a new Bluetooth connection can be estab-
lished by an optical signal after the Blue-
®
tooth interface is reactivated.
The unit for the switch-off time is seconds.
Entering 0 is not allowed, since the Blue-
®
tooth interface must always switch off after
the switch-off time elapses.
0 –
Table 32: Port Parameters
Default Description
0 Pin 4 is a digital output.
Pin 4 is a digital output and switched on
(+24 VDC).
0 Pin 2 is a digital output.
Pin 2 is a digital output and switched on
(+24 VDC).
765-1503/100-000
®
interface if