Reading Port Process Values; Reading Measured Power Values; Table 47 Port-Specific Configuration Parameters; Table 48 Port-Specific Process Data Of The Digital Inputs And Outputs - WAGO 765-1503/100-000 Product Manual

765-1503/100-000
Node Name
OverCurrentPin1
OverCurrentPin2
OverCurrentPin4
UnderCurrentPin1
UnderCurrentPin2
UnderCurrentPin4

10.3.3.1.4 Reading Port Process Values

The OPC UA server provides nodes with process data. For example, the OPC UA client
can read out the value on pin 4 of a port in the Pin4ProcessData node.
Process Data of the Digital Inputs and Outputs
The path to this node is:
Root > Object > DeviceSet > [device name] > DigitalConnector >
PortXX > SIOProcessData
Note
OPC UA client can only read process output data
The process output data is written by the EtherNet/IP scanner. The OPC UA client can
only read process output data.
The following table lists port-specific process data of the digital inputs and outputs.
Node Name
Pin2ProcessData
Pin4ProcessData

10.3.3.1.5 Reading Measured Power Values

The OPC UA server provides nodes with calculated measured values. For example, the
OPC UA client can read out the calculated total current of supply cable 1 in the SumCur-
rentL node.
Product manual | Version: 2.0.0
16DO FLD EI DC 24V 2.0A
Node Class Access Default Description
Variable Read 0
Variable Read 0
Variable Read 0
Variable Read 0
Variable Read 0
Variable Read 0
Table 48: Port-Specific Process Data of the Digital Inputs and Outputs
Node Class Access
Variable Read
Variable Read
Table 47: Port-Specific Configuration Parameters
Warning level for current upper limit on pin 1;
unit: 1 mA
0: monitoring not enabled
Warning level for current upper limit on pin 2;
unit: 1 mA
0: monitoring not enabled
Warning level for current upper limit on pin 4;
unit: 1 mA
0: monitoring not enabled
Warning level for current lower limit on pin 1; unit:
1 mA
0: monitoring not enabled
Warning level for current lower limit on pin 2; unit:
1 mA
0: monitoring not enabled
Warning level for current lower limit on pin 4; unit:
1 mA
0: monitoring not enabled
Description
Process data on pin 2
Process data on pin 4
Commissioning
79