Mroute Table - TP-Link JetStream T2700G-28TQ User Manual

11.1.2 Mroute Table

On this page you can get the desired mroute information through different search options.
Choose the menu Multicast Routing→Global Config→Mroute Table to load the following page.
The following entries are displayed on this screen:
Search Option

All:
Group:
Source:
Incoming Interface:
Mroute Table

Group:
Source:
Incoming Interface:
Uptime:
Expires:
RPF Neighbor:
Protocol:
Flags:
Detail:
Outgoing Interface:
Figure 11-2 Mroute Table
Select All to display all entries.
Select Group and enter the group of desired entry.
Select Source and enter the source of desired entry.
Select Incoming Interface and enter the incoming interface of
desired entry.
The destination group IP address.
The IP address of the multicast packet source to be combined
with the Group IP to fully identify a single route whose Mroute
table entry.
The incoming interface on which multicast packets for this
source/group arrive.
The time in seconds since the entry was created.
The time in seconds before this entry will age out and be
removed from the table.
The IP address of the Reverse Path Forwarding neighbor.
The multicast routing protocol which created this entry. The
possibilities are PIM DM and PIM SM.
The value displayed in this field is valid if the multicast routing
protocol running is PIM SM. The possible values are RPT or
SPT. For other protocols an "------" is displayed.
Displays the detailed information of the mroute entries.
Displays the outgoing interfaces on which multicast packets
for this source/group are forwarded.
226