Connecting System Components; Connecting Miq Modules: General Information - wtw DIQ/S 182-MOD System Operating Manual

Installation
Mounting direction
3 - 4
3.4

Connecting system components

3.4.1 Connecting MIQ modules: General information

You can connect the Universal Transmitter to MIQ modules without
connection cable (stack mounting).
Variant 1 - stack expansion
forwards.
The back of the Universal
Transmitter or an MIQ module is
attached to the lid of an
MIQ module
(page 3-6).
Select this variant if an
MIQ module is already
permanently installed, e.g. to a
wall.
Variant 2: - stack expansion
backwards.
The lid of an MIQ module is
attached to the back of the
Universal Transmitter or another
MIQ module (page 3-9).
Select this variant if the
Universal Transmitter or other
MIQ module is already
permanently installed, e.g. in a
panel.
MIQ Module
DIQ/S 182-MOD
MIQ Module
MIQ Module
DIQ/S 182-MOD
MIQ Module
MIQ Module
MIQ Module
ba75504e07
System 182
04/2012