Connecting The Power Pack / Charging The Batteries - wtw Multi 3410 Operating Manual

Digital ph / dissolved oxygen / conductivity meter for a digital ids sensor

Hide thumbs Also See for Multi 3410:

Table of Contents

Commissioning

Place four rechargeable batteries (type Mignon AA) in the bat-

tery compartment.

CAUTION

Make sure that the poles of the rechargeable batteries are posi-

tioned correctly.

The

signs on the batteries must correspond to the

battery compartment.

Close the battery compartment (2) and tighten the screws (1).

3.3.2 Connecting the power pack / charging the batteries

CAUTION

The line voltage at the operating site must lie within the input volt-

age range of the original power pack (see section 7.1).

CAUTION

Use original power packs only (see section 7.1).

CAUTION

The batteries in the battery compartment are automatically

charged when the power pack is connected.

Make sure that only NiMH rechargeable batteries are in the battery

compartment. The charging process is optimized for NiMH re-

chargeable batteries. Other battery types can cause damage dur-

ing the charging process.

Multi 3410

signs in the

ba75863e02

12/2009

Table of Contents