Installation
3 - 26
Fig. 3-23 DIQ/CHV open.
3.6.3 Installation of the DIQ modules
The DIQ module enclosure is designed like a commercial connection
socket and can be mounted directly on a wall. For mounting on a WTW
mounting stand, WTW provides the MS/DIQ mounting set. It contains
a pipe clip for the mounting stand and provides enough space for two
DIQ modules. For assembly use the screws and blind nuts provided
with the MS/DIQ as demonstrated in the following figure
Fig. 3-24 Mounting DIQ modules with the MS/DIQ mounting set.
Blind nut
ba75504e07
System 182
04/2012