wtw DIQ/S 182-MOD System Operating Manual page 24

Installation
Premounting the ISO
blind nuts
3 - 10
Note
Only use the plastic tapping screws supplied for attaching the contact
base. They ensure the correct fit.
5 Attach the contact base (pos. 6 in Fig. 3-7) on the Universal
Transmitter with the two plastic tapping screws (pos. 7).
8
Fig. 3-8 Premounting the ISO blind nuts (variant 2)
6 Insert the cheese-head screws (pos. 8 in Fig. 3-8) with the
plastic washers in the drilled mounting holes in the module lid
and loosely screw in the ISO blind nuts (pos. 9).
MIQ module
ba75504e07
System 182
9
04/2012