wtw DIQ/S 182-MOD System Operating Manual page 29

System 182
ba75504e07 04/2012
Terminal
labeling:
Fig. 3-13 Example: SENSORNET connection
6 Connect the cable ends to the terminal strip. At the same time,
look out for the designations of the terminals (red / shield /
green).
7 Tighten the coupling ring (pos. 3 in Fig. 3-12).
8 Close the enclosure.
Note
The complete assignment of the terminal strip is shown in section 3.12.
X3 X2 X1
SENSORNET 1
Filler stranded wire (SNCIQ...)
or black (SACIQ)
red green
SNCIQ(/UG)
or SACIQ
Installation
3 - 15