Maintenance And Cleaning; Maintenance; Cleaning - wtw DIQ/S 182-MOD System Operating Manual

System 182
Maintenance activities
DIQ/S 182-MOD,
DIQ modules,
MIQ modules
IQ sensors
ba75504e07 04/2012
8

Maintenance and cleaning

8.1

Maintenance

Component
IQ sensors
DIQ/S 182-MOD,
DIQ modules,
MIQ modules
8.2

Cleaning

Clean components mounted in the open of gross contamination as
necessary. We recommend to clean the worst of the dirt on the
enclosure and the area around it each time before opening in order to
prevent gross contamination from entering the open enclosure.
To clean the module, wipe the enclosure surfaces with a damp, lint-free
cloth. If compressed air is available on site, blow off the worst of the dirt
beforehand. Keep the enclosure closed while doing so.
Caution
The enclosure and the window of the display are made of plastic.
Therefore, avoid any contact with acetone or similar cleaning
agents. Any splashes must be wiped off immediately.
Caution
Never use high-pressure cleaners to clean components of the
DIQ/S 182-MOD.
The cleaning of the IQ sensors depends greatly on the respective
application. Instructions for this are given in the respective component
operating manual.
Maintenance and cleaning
Maintenance
Depending on the type of sensor
(see the component operating
manual of the sensor)
No maintenance required
8 - 1