Electrical Connections: General Instructions - wtw DIQ/S 182-MOD System Operating Manual

System 182
Cable glands
ba75504e07 04/2012
3.7

Electrical connections: General instructions

All electric cables are fed from below via prepared openings in the
enclosure of the DIQ/S 182-MOD and the MIQ modules. Cable glands
with different clamping ranges are included with the DIQ/S 182-MOD to
provide sealing between the cable and enclosure as well as for strain
relief. Select the matching cable gland for the respective cable
diameter:
 Small, clamping range 4.5 to 10 mm. This cable gland is suitable for
all IQ S N
ENSOR ET
outer insulation, see section 3.4.4) and IQ S
connection cable.
sealing ring 20 x 15 x 1 mm
cable gland M16
blind plug
 Large, clamping range 7 to 13 mm. This cable gland is required for
cable sheaths with an outside diameter of more than 10 mm and is
screwed into the enclosure via an extension piece.
sealing ring 20 x 15 x 1 mm
extension piece M16/M20
sealing ring 24 x 19 x 2 mm
cable gland M20
Note
If necessary, you can order other sizes of cable gland (see
chapter 11 A
CCESSORIES AND OPTIONS
cables (including earth cable after stripping the
).
Installation
N sensor
ENSOR ET
3 - 27