wtw DIQ/S 182-MOD System Operating Manual page 21

System 182
Premounting the ISO
blind nuts
ba75504e07 04/2012
4 Attach the contact base (pos. 5 in Fig. 3-2) on the Universal
Transmitter with the two plastic tapping screws (pos. 6).
5 On the Universal Transmitter, remove the two countersunk
screws (pos. 7 in Fig. 3-2) and swing open the lid.
9
Fig. 3-3 Premounting the ISO blind nuts (variant 1)
6 Insert the cheese-head screws (pos. 8 in Fig. 3-3) with the
plastic washers in the drilled mounting holes in the enclosure
and loosely screw in the ISO blind nuts (pos. 9).
Installation
DIQ/S 182-MOD
8
3 - 7