System 182
Materials required
Mounting the sun shield
on a mounting stand
ba75504e07
04/2012
3.5.2 Mounting on a mounting stand with the SSH/IQ sun shield
SSH/IQ sun shield (see chapter 11 A
4 mm set screw wrench
Tools
Phillips screwdriver.
2
3
Fig. 3-15 Mounting the SSH/IQ sun shield on a mounting stand
1
Screw the sun shield (pos. 1 in Fig. 3-15) with the four
hexsocket head screws (pos. 2), the washers (pos. 3) and the
clamps (pos. 4) at the required height on the mounting stand
from the back.
4
Installation
CCESSORIES AND OPTIONS
1
).
3 - 19