Installation
Stacking the
MIQ modules
3 - 8
MIQ module
Fig. 3-4
Stacking the MIQ modules (variant 1)
MIQ module
7
Fig. 3-5
Closing the enclosure (variant 1)
7
Attach the prepared Universal Transmitter to the lid of the
MIQ module. At the same time, ensure that the two clips on the
Universal Transmitter click into place in the lid of the
MIQ module. Subsequently, tighten the two screws (pos. 8 in
Fig. 3-3).
8
Close the lid of the Universal Transmitter and fix it with the two
countersunk screws (pos. 7 in Fig. 3-5).
DIQ/S 182-MOD
DIQ/S 182-MOD
ba75504e07
System 182
04/2012