wtw DIQ/S 182-MOD System Operating Manual page 131

System 182
Operating sequence in
case 2
ba75504e07 04/2012
1 Connect the IQ sensor.
2 Change to the measured value display with
component database is updated. The following display
appears (example):
3 Select the required option with
– If Add new sensor was selected, the system changes
directly to the measured value display. As soon as the
IQ sensor is ready for operation, it delivers a measured
value.
– If Assign sensor as a substitute was selected, a list with the
assignable sensors or inactive datasets appears.
4 Select the required sensor with
system changes to the measured value display. The IQ sensor
takes over all settings of the inactive dataset. As soon as the
IQ sensor is ready for operation, it delivers a measured value.
What to do if ...
m
. The
w
and confirm with
w
and confirm with
g
.
g
. The
9 - 5