Table of Contents
Advertisement
Installation
Connecting the 24 V AC/
DC line
3 - 34
Fig. 3-28 Prepared 24 V AC/DC line.
4
Open the enclosure of the Universal Transmitter.
4
2
1
3
Fig. 3-29 Inserting the 24V AC/DC line
5
Screw a cable gland (pos. 1 in Fig. 3-29) with sealing ring (pos.
2) into the enclosure below the 24 V AC/DC connection.
6
Loosen the coupling ring (pos. 3).
7
Feed the 24 V AC/DC line through the cable gland into the
enclosure. When doing so bend the flexible divider (pos. 4) to
the right.
ca. 45 mm
wire 1
wire 2
System 182
ba75504e07
04/2012
Advertisement
Table of Contents
