Table of Contents
Advertisement
Connect Ethernet Network Cables
"Connect the SER MGT Cable" on page 67
■
Connect Ethernet Network Cables
The server has four 10 Gigabit Ethernet network connectors, marked NET 0, NET 1, NET
2, and NET 3. Use these ports to connect the server to the network. The Ethernet interfaces
operate at 100 Mbps, 1000 Mbps, and 10000 Mbps. See,
Cables" on page
Note -
of these Ethernet ports. Refer to
S7-2 Series Servers Administration
Note -
devices that support 10000BASE-T networks.
70
SPARC S7-2L Server Installation Guide • June 2017
70.
The Oracle ILOM sideband management feature enables you to access the SP using one
To achieve 10GbE network speeds, use Category 6A (or better) cables and network
"Connecting to the SP (In-band)" in SPARC and Netra SPARC
Guide.
"Connect Ethernet Network
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARC S7-2L and is the answer not in the manual?
Questions and answers