Usb Ports; Ser Mgt Port - Oracle SPARC S7-2L Installation Manual

USB Ports

Two USB 2.0 ports can be accessed from the front of the server. See the location of the USB
ports at "Front Panel Components With Eight-Drive Backplane (Installation)" on page
USB ports support hot-plugging. You can connect and disconnect USB cables and peripheral
devices while the server is running, without affecting server operations.
Each USB 2.0 port supplies 5V output at 500 mA.
You can connect up to 126 devices to each of the two USB controllers for a total of 252
Note -
USB devices per server.
No. Description
1 +5V supply
2 Data –
3 Data +
4 Ground
Related Information
"Server Overview" on page 12
■
"Front Panel Components With Eight-Drive Backplane (Installation)" on page 14
■
"Rear Panel Components (Installation)" on page 20
■
"Cabling Requirements" on page 59
■

SER MGT Port

The SER MGT RJ-45 port, located on the rear panel, provides an TIA/EIA-232 serial Oracle/
Cisco standard connection to the SP. This port is the default connection to the Oracle ILOM
Identifying Ports
14. The
Connecting Cables 61