Connecting Data And Management Cables - Oracle SPARC S7-2L Installation Manual

Connecting Data and Management Cables

Segment
Power segment
(P1 to P15)
Related Information
"Rear Panel Components (Installation)" on page 20
■
"Cabling Requirements" on page 59
■
"Connecting Data and Management Cables" on page 66
■
Connecting Data and Management Cables
After you have connected these cables, see
Time" on page 75
"Connect the SER MGT Cable" on page 67
■
"Connect the NET MGT Cable" on page 68
■
"Connect Ethernet Network Cables" on page 70
■
"Connect Other Data Cables" on page 71
■
66 SPARC S7-2L Server Installation Guide • June 2017
Pin Signal
S10
S11 Gnd
S12
S13
S14 Gnd
P1 3.3V
P2 3.3V
P3 3.3V
P4 Gnd
P5 Gnd
P6 Gnd
P7 5.0V
P8 5.0V
P9 5.0V
P10 Gnd
P11 Reserved
P12 Gnd
P13 12.0V
P14 12.0V
P15 12.0V
before connecting the AC power cords.
Note
Second mate
Second mate
Not Supported
Not Supported
Not Supported
First mate
Second mate
Second mate
Pre-charge, second mate
Second mate
Should be grounded
First mate
Pre-charge, second mate
"Powering On the Server for the First