Endress+Hauser Proservo NMS83 Operating Instructions Manual page 230

Operating menu
Assign TV
Navigation
Description
Selection
Factory setting
Additional information
230
 Setup → Advanced setup → Communication → HART output → Configuration
→ Assign TV
Assigns a tank variable to the third HART variable (TV).
• Tank level
• Liquid temperature
• Vapor temperature
• Water level
• P1 (bottom)
• P2 (middle)
• P3 (top)
• Observed density value
• Volume
• Flow velocity
• Volume flow
• Vapor density
• Middle density
• Upper density
• Correction
• Tank level %
• GP 1 ... 4 value
• Measured level
• P3 position
• Tank reference height
• Local gravity
• P1 position
• Manual density
• Tank ullage
• Average profile density
• Lower density
• Upper interface level
• Lower interface level
• Bottom level
• Displacer position
• HART device 1 ... 15 PV
• HART device 1 ... 15 SV
• HART device 1 ... 15 TV
• HART device 1 ... 15 QV
• HART device 1 ... 15 PV mA
• HART device 1 ... 15 PV %
• Element temperature 1 ... 24
• AIO B1-3 value
• AIO C1-3 value
• AIP B4-8 value
• AIP C4-8 value
• None
Water level
Read access
Write access
Operator
Maintenance
Proservo NMS83

Endress+Hauser