Endress+Hauser Proservo NMS83 Operating Instructions Manual page 227

Proservo NMS83
Selection
Factory setting
Additional information
Primary variable (PV)
Navigation
Additional information
0 % value
Navigation
Prerequisite
Description
User entry
Factory setting
Endress+Hauser
• Measured level
• Tank level
• Tank ullage
• Vapor temperature
• Air temperature
• Liquid temperature
• Observed density value
• Upper density
• Middle density
• Lower density
• Upper interface level
• Lower interface level
• Bottom level
• Water level
• Distance
• P1 (bottom)
• P2 (middle)
• P3 (top)
• GP 1 value
• GP 2 value
• GP 3 value
• GP 4 value
• None
Tank level
Read access
Write access
 Setup → Advanced setup → Communication → HART output → Configuration
→ Primary var (PV)
Read access
Write access
 Setup → Advanced setup → Communication → HART output → Configuration → 0 %
value
PV source (→  233) = Custom
Defines which value of the primary variable corresponds to 0%.
Signed floating-point number
0 mm
Operator
Maintenance
Operator
-
Operating menu

227