Configuration - Endress+Hauser Proservo NMS83 Operating Instructions Manual

Proservo NMS83
Communication interface protocol variant
Navigation
Description
Selection
Factory setting
Additional information
V1 address
Navigation
Prerequisite
Description
User entry
Factory setting
Additional information
V1 address
Navigation
Prerequisite
Description
Endress+Hauser
"Configuration" submenu
This submenu is only present for devices with a V1 communication interface.
Navigation  Setup → Advanced setup → Communication → V1 X1-4
 Setup → Advanced setup → Communication → V1 X1-4 → Configuration → Protocol
variant
Determines which variant of the V1 protocol is used.
• None
• V1
None
Read access
Write access
 Setup → Advanced setup → Communication → V1 X1-4 → Configuration → V1
address
Communication interface protocol variant (→  219) = V1 or MDP
Identifier of the device for the V1 communication.
0 to 99
1
Read access
Write access
 Setup → Advanced setup → Communication → V1 X1-4 → Configuration → V1
address
Communication interface protocol variant (→  219) = BBB or MIC+232
Identifier of the previous device for V1 communication.

→ Configuration

Operator
Maintenance
Operator
Maintenance
Operating menu



219