Endress+Hauser Proservo NMS83 Operating Instructions Manual page 247

Proservo NMS83
Factory setting
Additional information
P3 (top) source
Navigation
Description
Selection
Factory setting
Additional information
P3 (top)
Navigation
Description
Additional information
P3 (top) manual pressure
Navigation
Prerequisite
Description
User entry
Factory setting
Endress+Hauser
Gauge
Read access
Write access
 Setup → Advanced setup → Application → Tank config → Pressure → P3 (top) source
Defines the source of the top pressure (P3).
• Manual value
• HART device 1 ... 15 pressure
• AIO B1-3 value
• AIO C1-3 value
• AIP B4-8 value
• AIP C4-8 value
Manual value
Read access
Write access
 Setup → Advanced setup → Application → Tank config → Pressure → P3 (top)
Shows the pressure (P3) at the top transmitter.
Read access
Write access
 Setup → Advanced setup → Application → Tank config → Pressure → P3 (top)
manual
P3 (top) source (→  247) = Manual value
Defines the manual value of the top pressure (P3).
–2.5 to 2.5 bar
0 bar
Operator
Maintenance
Operator
Maintenance
Operator
-
Operating menu


247