Endress+Hauser Proservo NMS83 Operating Instructions Manual page 30

Installation
30
5.2.3 Tools required for installation
The following tools are required when installing NMS8x.
Tools
Box end wrench
Crescent wrench
Allen key
Screw driver
• Cross-head screwdriver
• Flat-blade screwdriver
Wire cutters or terminal pliers
Crimp
Water pump pliers
Density calibration test weight
Figures
Use the following size
• 24 mm (0.94 in)
• 26 mm (1 in)
• 30 mm (1.2 in)
• 32 mm (1.3 in)
Use the size of 350 mm (13.78 in)
Use the size of 3 mm (0.12 in)or
5 mm (0.17 in)
A:
Max. 2.5 mm (0.1 in)/
4 mm (0.16 in)
This tool is used especially for density
measurement application (optional).
Proservo NMS83
Notes
Endress+Hauser