Endress+Hauser Proservo NMS83 Operating Instructions Manual page 114

Operation
114
10.3.3 Sources for gauge commands
Gauge commands can be sent via various sources.
• Displays or CDI (e.g. FieldCare)
• Digital input (e.g. NHS8 switch)
• Fieldbus (Modbus, V1, HART)
The last received gauge command via any sources will be executed as usual.
During calibration, gauge commands are not accepted from any sources.
X X X X
X X X
X X
mm
1 Display operation
2 Digital input (e.g. NHS8 switch)
3 Tankvision
1
Proservo NMS83
2
3
NXA820
INST
STOP LIFT
OFF
Endress+Hauser
A0029575