Reset Instrument - R&S NGE100B Series User Manual

®
R&S NGE100B
Figure 5-26: License dialog
To install from an xml file, proceed as follows:
1. Copy the xml file containing the registered key code into the USB flash drive.
2. Connect the USB flash drive to the USB port of the instrument.
3. Select "Install".
If the installation is successful, the option is marked as "Installed" under Installation
Status.
To manually enter the key code, proceed as follows:
1. Press Enter key to invoke the
2. Enter the key code (30-digit number) of the option in the entry box.
3. Select "Install".
If the correct key code is entered, the option is marked as "Installed".
If an invalid key code is entered, an error message is displayed. Re-enter the cor-
rect key code.

5.7.4 Reset Instrument

This function resets the instrument to factory default settings.
► Select "Device > Reset" menu item.
The R&S NGE100B displays the "General" dialog. See
User Manual 5601.1343.02 ─ 04
Virtual Keyboard.
Instrument Functions
General Instrument Settings
Figure 5-27 .
56