Remote Connection - Elephant Robotics myCobot Pro 600 User Manual

2.2.2 Remote Connection

1. Power on the robot and connect the robot arm to the PC by using the
network cable.
2. Open the software "VNC Viewer" on the remote port, as shown in Figure 2-
3, then enter the IP address of the robot in the input box, and press Enter to
connect.
1，
As shown in Figure 2-4, in the authentication window that pops up, enter
the account and password of the robot port, and the default account name
is "PI" and the password is "elephant". Click "OK" button to connect when
you have finished typing.
Fig. 2-3 Opening VNC Software
21