Table of Contents
Advertisement
Fig. 5-87 Monitor Socket
3， Connecting Robot with PC
As shown in Figure 5-88, you can open the software "Sokit" on your PC
terminal and click "Client" at the top of the software to enter the network setting
page. The server address and port number can be the values set in RoboFlow and
then you can click TCP connection to connect to the robot. If the connection is
successful, information as shown in Figure 5-89 will be displayed.
134
Advertisement
Table of Contents
Need help?
Do you have a question about the myCobot Pro 600 and is the answer not in the manual?
Questions and answers