Other Operations - Hitachi GX1000-SMC013X Instruction Manual

4.12 Other Operations

(1) Operation management and configuration settings
For details about the operation management and configuration settings, see the
corresponding parts of this manual shown below.
Basic software operation management and configuration settings
Part 2: Base software Configuration Guide
Basic software operation management and configuration settings for network
interface units with a service processor
Part 4: Basic Software NIFs with an SPBasic Software NIFs with an SP
Service Processor functionality operation management and configuration settings
Part 5: SP Functionality, Basic Functions
WAN acceleration functionality operation management and configuration settings
Part 6: SP Functionality: WAN Acceleration Functionality
After setting a configuration, back up the operation information to simplify the restoration in
NOTE
the event that a failure occurs or if a control and switching unit is replaced.
For details about backup operations, see 5.1 Base Software Configuration Guide Device
Management and 20.2 Storing and restoring the configuration in an external device.
(2) System interoperation tests
Before actual system operation, conduct a test to check the configuration settings.
(3) Troubleshooting
To troubleshoot problems, see the corresponding part of this manual, shown below.
Basic software troubleshooting
28.1 Additional Information in the Troubleshooting Guide
Basic software troubleshooting for network interface units with a service processor
18 Troubleshooting Guide
Service processor functionality troubleshooting
0
Actions to be taken to resolve problems
92