Command Mode List - Hitachi GX1000-SMC013X Instruction Manual

6.2 Command mode list

Each command is described in the format below.
The following table lists the command modes.
Table 6-1 Command mode list
No. Prompt displayed for
the command mode
(config)
1
(config-if)
2
(config-adv-acl)
3
(config-pol)
4
(config-pol-sw)
5
100
Description
Global configuration mode
Configures an interface.
Configures an Advance filter.
Configures policy-based routing list
information.
Configures policy-based switching
list information.
Command for mode transition
# enable
# configure
(config)# interface
(config)# advance access-list
(config)# policy-list
(config)# policy-switch-list