Hitachi GX1000-SMC013X Instruction Manual page 404

tcp-option
Description
Changes the default value, shown in Table 26-4, of the TCP option number subject to WAN
acceleration processing.
Input mode
SP configuration mode
Syntax
tcp-option { accelerate | passthrough } {
<option number>-<option
tcp-option { accelerate | passthrough } default
Parameters
accelerate | passthrough
Specifies operation after the change.
1. Default value
This parameter cannot be omitted.
2. Specifiable value range
accelerate
passthrough
TCP option number
Specifies the TCP option number.
1. Default value
This parameter cannot be omitted.
2. Specifiable value range
0-255
3.Maximum number of values that can be set.
16
default
Discards what has been set by specifying
to the default value shown in Table 26-4.
404
number> }[...]
Changes the default value of the TCP option number from pass-through to
WAN acceleration processing.
Changes the default value of the TCP option number from WAN acceleration
processing to pass-through.
<option number> |
accelerate passthrough
or , and resets