25.2 Examples of configuration settings
This section provides examples of configuration settings for the base software and an SP.
For details about the configuration commands of the base software, see Part 2: Base
software Configuration Guide and Part 4: Basic Software NIFs with an SP.
25.2.1 Network configuration example
In the following example of a network configuration, a client PC is located in Tokyo
(10.1/16) and a server is located in New York (10.3/16).
The Device is installed on both ends of WAN on the TCP communication path between the
client and the server. Port 1/1 and port 1/2 of each Device is connected to a line on the LAN
side and WAN side respectively, and a NIF equipped with an SP is installed on NIF 2.
For user traffic, VLAN 200 is used. For control traffic of a NIF equipped with an SP, VLAN
2222 is used.
Tokyo
10.1/16
Client
1/1
PC
1GbE
Hitachi WAN
Accelerator
1/2
Router
1GbE
GX#1, SP#1
WAN
Hitachi WAN
Accelerator
1/2
Router
1GbE
GX#2, SP#2
New York
10.3/16
Server
1/1
1GbE
379