Hitachi GX1000-SMC013X Instruction Manual page 303

show ipv6 route
Description
This command displays IPv6 address routes.
Input mode
SP user mode and SP administrator mode
Syntax
show ipv6 route [connected|dep|kernel|static|X:X::X:X|X:X::X:X/M]
Parameters
When this parameter is omitted:
The command displays all routes.
connected
Displays the directly connected routes.
dep
Displays the routes acquired from DEP.
kernel
Displays the routes added by external modules.
static
Displays static routes.
X:X::X:X
Displays the route to a host specified by using the IPv6 address.
X:X::X:X
Displays the route to a network specified by using an IPv6 address.
Display example:
SP01> show ipv6 route
Codes: K - kernel route, C - connected, S - static, R - RIPng, O - OSPFv3,
I - ISIS, B - BGP, N - NAT-PT, D - Delegated Prefix, > - selected route,
>* - FIB route, b - Backup route, < - delayed route, Q - Untyped route
C>* ::1/128 is directly connected, lo
C>* fe80::/64 is directly connected, spi0
C>* fe80::/64 is directly connected, bnet0
C>* fe80::/64 is directly connected, fpn0
SP01>
(1) Code, gateway address, connection status, and interface name
Notes
None
/
M
303