Sp Functionality; Sp-Port - Hitachi GX1000-SMC013X Instruction Manual

14.3 SP functionality

sp-port

Sets the line connected to an SP for the NIF equipped with the SP. Entering this command
switches to config-sp mode in which information about the SP can be set.
Input format
To set information:
sp-port
To delete information:
no sp-port
Input mode
(config)
Parameters
<nif no.>
Specifies the NIF number and the port number for the SP connection line.
1. Default value
This parameter cannot be omitted.
2. Specifiable value range
See Specifiable values for parameters. For the port number, specify
Default behavior
No information about the SP is set.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
None
/
<nif no.> <port no.>
/
<nif no.> <port no.>
/
<port no.>
3
.
191