Hitachi GX1000-SMC013X Instruction Manual page 392

Table 26-7 Other default values
Default item
Bandwidth assigned to a bandwidth-grp
The option number that indicates WAN acceleration processing,
which is set to an option in a TCP packet.
Table 26-8 List of error messages
No. Command
rule
1
2
3
4
port
5
6
tcp-option
7
8
9
compress-port
10
11
share-sp
12
392
Error message
Rule index must be 1 -
1000
Both the LAN and WAN
side address is not
allowed if any
Number of rule has been
reached max (1000)
If specify
passthrough, port
number must be
specified.
port number has
X
already been set to
accelerate
port number has
X
already been set to
passthrough
tcp-option number must
be equal to
<2, 3, 4, 5,
is invalid.
X
tcp-option number
X
already been set to
accelerate
tcp-option number
X
already been set to
passthrough
port number has
X
already been set to
compress-port off
port number has
X
already been set to
compress-port on
Number of ip address
has been reached max
(6)
Default value
100 Mbps
100
Meaning
The value range of the list number for
the rule is from 1 to 1000.
any
cannot be specified for the
address of both the LAN side (from)
and the WAN (to) side.
The number of rules has reached the
maximum value (1000).
passthrough
If
number needs to be specified.
The port number
set to accelerate.
The port number
set to passthrough.
TCP option numbers are
8>.
8>. X is invalid.
has
TCP option number
been set to accelerate.
has
TCP option number
been set to pass-through.
The port number
set to off.
The port number
set to on.
The number of IP addresses has
reached the maximum value, 6.
is specified, a port
X has already been
X has already been
<2, 3, 4, 5,
X has already
X has already
X has already been
X has already been