Hitachi GX1000-SMC013X Instruction Manual page 125

<source
any
If is specified, the source MAC address is not used as a filter condition.
MAC address (nnnn.nnnn.nnnn): 0000.0000.0000 to ffff.ffff.ffff (hexadecimal)
{
<destination mac> <destination mac mask>
cdp | lacp | lldp | oadp | pvst-plus-bpdu | slow-protocol}
Specifies the destination MAC address.
To specify all destination MAC addresses, specify
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify <destination mac> <destination mac
any bpdu
,
Specify the destination MAC address for
For <destination mac
specifies bits in the MAC address whose permitted value is arbitrary.
host
If <destination mac>
<destination
any
If is specified, the destination MAC address is not used as a filter
condition.
bpdu
If is specified, BPDU control packets are used as the filter condition.
cdp
If is specified, CDP control packets are used as the filter condition.
lacp
If or
filter condition.
This Device uses slow protocol packets in LACP and IEEE 802.3ah/UDLD
functionality.
lacp
If is specified, LACP control packets are used as the filter condition.
lldp
If is specified, LLDP control packets are used as the filter condition.
oadp
If is specified, OADP control packets are used as the filter condition.
pvst-plus-bpdu
If
condition.
MAC address (nnnn.nnnn.nnnn): 0000.0000.0000 to ffff.ffff.ffff (hexadecimal)
<ethernet type>
Specifies the Ethernet type number.
1. Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
2. Range of values:
Specify 0x0000 to 0xffff (hexadecimal) or the Ethernet type name.
For details about the Ethernet type names that can be specified, see Ethernet
type names that can be specified.
vlan { |
<vlan id> <vlan id list name>
Specify the VLAN ID or VLAN list name.
This parameter has an effect only when it is applied to an Ethernet interface.
1. Default value when this parameter is omitted:
mac>.
cdp lacp lldp oadp
, , , ,
mask>, specify a mask in MAC address format that
is specified, the filter condition is an exact match of
mac>.
slow-protocol
is specified, slow protocol packets are used as the
is specified, PVST+ control packets are used as the filter
}
| host
<destination mac>
any
.
host
mask>,
pvst-plus-bpdu
, , or
<destination mac>.
| any | bpdu |
<destination mac>,
slow-protocol
.
125