Hitachi GX1000-SMC013X Instruction Manual page 367

18 NOTICE SP
There was no startup configuration file or it could not be read.
[Explanation of the message text]
None.
[Action]
None.
19 NOTICE SP
An attempt to clear statistics failed.
[Explanation of the message text]
None.
[Action]
1. Collect error information according to the method for
collecting error information of the corresponding SP when the
error occurred, and then send it to maintenance personnel.
2. The maintenance personnel sends the collected information
to the support division.
20 NOTICE SP
An attempt to change the basic information failed.
[Explanation of the message text]
None.
[Action]
Collect error information according to the method for collecting
error information of the corresponding SP when the error
occurred, and then send it to maintenance personnel.
2. Maintenance personnel sends the collected information to the
support division.
3. Execute the
to restart the SP.
The startup
20013711
configuration file is
not found or broken.
Failed to clear SP
25014713
counters.
Failed to change
22034010
fundamental SP
information.
close nif free nif
and commands of the BCU
This message is output
when a configuration file
permission error occurred or
the startup configuration
could not be read
successfully because there
was no configuration file.
This message is output
clear counters
when the
command executed from
BCU fails to clear statistics.
This message is output
when an attempt failed to
change the basic
information about the SP
defined in the BCU
configuration informed by
the BCU.
[Design memo]
This message is designed
for when an attempt to view
the basic information
received from the BCU failed
and an attempt to write to
the SP shared memory
failed.
367