Table of Contents
Advertisement
track-object
Specifies the track ID of the track that monitors communication of routing
information.
1.
2.
Default behavior
None
Impact on communication
If you change routing information for the selected policy-based routing list information
which has already been set in the access list, the target packets might be temporarily
discarded.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
Before specifying this command, configure the VLAN interface.
2.
Before specifying the
tracking functionality for policy-based routing.
3.
To change the VLAN interface and IP address, you must first delete the command
settings.
Related commands
interface vlan
policy-list
policy-list resequence
168
network connected to the specified destination interface or an address that
has been set on the specified destination interface.
<track object id>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Specify a track ID in the range from 1 to 1,024 in decimal.
track-object
parameter for this command, configure the
Advertisement
Table of Contents
Troubleshooting
