Hitachi GX1000-SMC013X Instruction Manual page 126

2.
user-priority
Specifies the user priority.
1.
2.
ctag-untagged
Specifies detection of packets with no customer tag.
1.
2.
ctag-user-priority
Specifies a user priority for the customer tag.
1.
2.
ctag-vlan
Specifies a VLAN ID for the customer tag.
1.
2.
{ip |
<protocol>
You can select this parameter when
condition.
Specifies the upper-layer protocol condition for IPv4 packets.
Note that if all protocols are applicable, specify
1.
2.
{ipv6 |
You can select this parameter when
condition.
126
None. (The parameter is not set as a detection condition.)
Range of values:
Specify the VLAN ID or VLAN list name.
For details about VLAN IDs, see 6.3 Specifiable values for parameters.
<priority>
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
Range of values:
Specify 1 to 7 (in decimal).
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
Range of values:
None
<priority>
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
Range of values:
Specify 1 to 7 (in decimal).
<vlan id>
Default value when this parameter is omitted:
None. (The parameter is not set as a detection condition.)
Range of values:
Specify 1 to 4,095 (in decimal).
| icmp | igmp | tcp | udp}
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Set 0 to 255 (in decimal) or a protocol name.
For details about the protocol names that can be specified, see Protocol
names that can be specified (IPv4).
| icmp | tcp | udp}
<protocol>
mac-ip
is specified as the flow detection
ip
.
mac-ipv6
is specified as the flow detection