Configuration For Sp (Sp#2); Network Configuration Example (L3 Out-Of-Path Configuration) - Hitachi GX1000-SMC013X Instruction Manual

25.2.5 Configuration for SP (SP#2)

####################
# Bridged Network
####################
bnet1
# BINDINGS
bind spi0 vlan no-tag
####################
# ACCELERATE
####################
accelerate
# ACCELERATE STATEMENTS
accelerate enable
# ACCELERATE INTERFACES
interface bnet1
# RULES
bandwidth-grp 1 dscp 48
# MAPPING PORTS
# MAPPING COMPRESS PORTS
compress-port on
compress-port off
# MAPPING TCP-OPTIONS
# MAPPING ACCELERATE-TCP-OPTIONS
# BANDWIDTH GROUPS
bandwidth-grp
# SHARE SP SETTING
# EQUIPMENT SETTING
max-session
# ACCELERATE TIMEOUTS
# ACTION SETTING
# LOG THRESHOLD
log-threshold lan rtt_min
log-threshold lan rtt_max
log-threshold lan loss
log-threshold wan rtt_min
log-threshold wan rtt_max
log-threshold wan loss
# LOG
log accelerate WAN_ACC notice

25.2.6 Network configuration example (L3 out-of-path configuration)

In the example network configuration below, a client PC is located in Tokyo (10.1/16) and a
server is located in New York (10.3/16).
The Device is installed on both ends of a WAN on the TCP communication path between
#
#
rule 10 vlan 200 from 10.3.0.0/16 to 10.1.0.0/16 do accelerate compress
23
2000-2999
1
6000
1000 M
5
1000
50
5
1000
50
383