Hitachi GX1000-SMC013X Instruction Manual page 253

log mng
Description
This command sets the output destination and output error level in the
configuration definition mode.
Syntax
To set or change information:
log mng SESSION [SEVERITY]
To delete information:
delete log mng SESSION
Parameters
SESSION
Specifies the session.
1.
2.
SEVERITY
Specify the log level to be reported.
1.
2.
Notes
log mng MNG
If
Default value when this parameter is omitted:
None (this parameter cannot be omitted).
Range of values:
Sessions that were created by the
Default value when this parameter is omitted:
notice
Range of values:
Emergency alert critical
, ,
has not been set,
log-session
command
error warning notice
, , ,
log mng MNG info
is set by default.
log
level of
info debug
, , and
253