Hitachi GX1000-SMC013X Instruction Manual page 416

accelerate-tcp-option
Description
Sets the option number for WAN acceleration processing, which is set to an option in a TCP
packet.
Input mode
SP configuration mode
Syntax
accelerate-tcp-option {
Parameters
{ <
option number
Specifies the option number for WAN acceleration processing.
1. Default value
This parameter cannot be omitted.
2. Specifiable value range
<option
default
Notes
This command is set when a packet with the option number 100 is received from the
LAN side.
What has been set by executing this command is immediately enabled.
Execute this command when there is no traffic.
When this command is set, a confirmation message below appears. If you want to
set the command, enter
WARNING: do you really want to overwrite the accelerate option number
(y/n)? [n]:
416
<option
> | default }
number>
6, 7, 9-255
Discards what has been set and resets to the default value (100).
y
. If you want to stop the setting, enter
number> | default }
n
.